📬📦FREE SHIPPING ON ORDERS OF $149+ in Continental US📦📬*Excluding CA

Blank Frosted Mason Jar with Lid/Straw
Blank Frosted Mason Jar with Lid/Straw
  • Load image into Gallery viewer, Blank Frosted Mason Jar with Lid/Straw
  • Load image into Gallery viewer, Blank Frosted Mason Jar with Lid/Straw

Blank Frosted Mason Jar with Lid/Straw

Regular price
$11.00
Sale price
$11.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

12oz
METHOD 1 - USING A MUG PRESS:


Supplies needed:
- sublimatable substrate (glass mug)
- sublimation transfer
- scratch paper
- heat tape
- Fan for cooling

Mug heat press settings:
- temperature - 400 degrees F
- dwell time - 5:00 - 7:00 minutes (see the press manufacturer for recommended
dwell time for glass mug)
- pressure - light

Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the mug press brand and model ink and paper
and atmospheric conditions.

2nd Note: Be sure that the artwork does not go beyond the size limits of the
mug press.

Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer near the handle of the mug using the heat
tape.
4. Wrap a piece of scratch paper around the transfer and mug taping if
necessary.
6. Center the mug in the mug press.
7. Close the mug press using the mug heat press settings above.
8. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
9. Tear off the scratch paper and the transfer and place in front of fan for
cooling.

Tips:
- DO NOT place mugs into water after sublimation - cracking will occur. Use a
fan instead.
- If the image of the final product appears light increase the pressure or
the dwell time slightly (30-60 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (15-30 seconds).
- Too much pressure can cause trapped moisture in the paper to "jet" away
pulling ink with it in a spiked-peaked formation. To avoid this reduce the
pressure.



METHOD 2 - USING A MUG WRAP:

Supplies needed:
- convection oven
- silicone mug wrap
- sublimatable substrate (glass mug)
- sublimation transfer
- scratch paper
- Fan

Oven settings:
- temperature - 400 degrees F
- dwell time - 12:00 - 18:00 minutes (depending on the wrap and oven type)
- mug wrap pressure - light to medium

Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the oven brand and model ink and paper and
atmospheric conditions.

2nd Note: Be sure that the artwork does not go beyond the size/dimension
limits of the mug wrap.

3rd Note: Convection ovens are recommended over traditional ovens for even
distribution of heat.

4th Note: Preheat the oven to 400 degrees F before placing the mug into the
oven.

Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer near the handle of the mug using the heat
tape.
4. Wrap a piece of scratch paper around the transfer and mug taping if
necessary.
5. Wrap the silicone wrap around the mug and push the metal prongs through the
metal loops and squeeze together with both hands until secured.
6. Using the oven settings above stand the mug up in the oven. If placing
multiple mugs leave space between each to allow for proper heat & air
circulation.
7. Remove items from the oven after the appropriate dwell time using heat
resistant gloves if necessary - the items will be very hot.
8. Remove the mug wrap tear off the scratch paper and the transfer and place
mug in front of fan.

Tips:
- DO NOT place mugs into water after sublimation - cracking will occur. Use
fan instead.
- If the image of the final product appears light increase the pressure or
the dwell time (1-3 minutes).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (15-30 seconds).