📬📦FREE SHIPPING ON ORDERS OF $149+ in Continental US📦📬*Excluding CA

Blank Ceramic Shot Glass (1.5oz)

Blank Ceramic Shot Glass (1.5oz)

Regular price
$2.99
Sale price
$2.99
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

SHOT GLASS (1.5oz)  SUBLIMATION

METHOD 1 - IN A CONVECTION OVEN (using shrink wrap)

Supplies needed:
- sublimatable substrate (Shot Glass)
- sublimation transfer
- shrink wrap
- heat gun (to pre-shrink the shrink wrap onto the Shot Glass)
- Fan for cooling (DO NOT PUT IN WATER THE GLASS WILL CRACK)

Oven settings:
- temperature - 400 degrees F if using a convection oven (recommended).
- dwell time - 6:00 - 8:00 minutes (depending on the oven type)

- The recommended settings above may need adjustments for best results.
Settings will vary depending on the oven brand and model ink and paper and
atmospheric conditions.
- Convection ovens are recommended over traditional ovens for even
distribution of heat.
- Preheat the oven to 400 degrees F before placing the shot glass into the
oven

Steps:
1. Position the substrate onto the transfer.
2. Tape two ends of the transfer. Make sure to start and end the transfer in
between where the white area starts and ends.
3. Place the substrate and transfer into the shrink wrap sleeve
4. Using the heat gun carefully direct hot air onto the shrink wrap evenly
until the shrink wrap has conformed all around the shot glass
5. Using the oven settings above place the glass in the oven upside down. If
placing multiple shot glasses leave space between each to allow for proper
heat & air circulation.
6. Remove items from the oven after the appropriate dwell time using heat
resistant gloves if necessary - the items will be very hot.
7. Remove the shrink wrap and the transfer and put in front of a fan to cool.

Tips:
- Do not place glass into water after sublimation - cracking will occur. Use a
fan instead.
- If the image of the final product appears light increase the pressure or
the dwell time (1-3 minutes).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (15-30 seconds).



METHOD 2 - IN A CONVECTION OVEN

Supplies needed:
- silicone mug wrap 
- sublimatable substrate (Shot Glass)
- sublimation transfer
- scratch paper
- Fan for cooling (DO NOT PUT IN WATER THE GLASS WILL CRACK)

Oven settings:
- temperature - 400 degrees F.
- dwell time - 7:00 - 9:00 minutes (depending on the wrap and oven type)
- Silicone wrap pressure -medium

- The recommended settings above may need adjustments for best results.
Settings will vary depending on the oven brand and model ink and paper and
atmospheric conditions.
- Be sure that the artwork does not go beyond the size/dimension limits of the
Silicone wrap.
- Convection ovens are recommended over traditional ovens for even
distribution of heat.
- Preheat the oven to 400 degrees F before placing the shot glass into the
oven.

Steps:
1. Position the substrate onto the transfer.
2. Tape two ends of the transfer. Make sure to start and end the transfer in
between where the white area starts and ends.
3. Wrap another piece of scratch paper around the shot glass and tape the
ends. This prevents ink from transferring onto the wrap.
4. Wrap the silicone wrap around the shot glass also starting in between
white area of shot glass and stretch and roll the silicone wrap around
itself.
5. Put a strip of tape around silicone wrap to prevent it from unwrapping.
6. Using the oven settings above stand the shot glass up in the oven. If
placing multiple shot glasses leave space between each to allow for proper
heat & air circulation.
7. Remove items from the oven after the appropriate dwell time using heat
resistant gloves if necessary - the items will be very hot.
8. Remove the silicone wrap tear off the scratch paper and the transfer and
put in front of a fan to cool.

Tips:
- Do not place glass into water after sublimation - cracking will occur. Use a
fan instead.
- If the image of the final product appears light increase the pressure or
the dwell time (1-3 minutes).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (15-30 seconds).

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
L
La Dawn
Beautiful

I love the way that the first set turned out had to order more. Fast shipping and great customer service.

D
D.P.
These Shot Glasses are the Best!!!

From start to finish I was so impressed with Monique, her business, and the product. She was so quick to reply when I contacted her to inquire about shipping time and quantity. She was extremely helpful in assisting me. I explained to her my urgency in needing the product fast. She shipped them immediately and I received them with in 48 hours. Her packaging impressed me. I have purchased similar items before but no one else out as much attention to the protection of the product as she did. Lastly, these shot glasses sublimate beautifully. The color is vibrant, I’ve never gotten such great color from any other vendor before. I will continue to shop with Star-Seed Blanks LTD from here on out! Thank you Monique!

K
Kavida Degrasse
Fast shipping ,packaging

I ordered 12 ceramic glasses and I was so worried about it making it on time but I must admit it came faster than I expected and all my glasses were still intact and they took extra measures to make sure. My package would be safe. Thank you! I will definitely shop with you again.